Stage Lighting
-
$25.98Water Resistant Red Green Line Generator Laser Module for Wood Metal Stone Cutting Locator -
Regular Price: $42.98
Special Price $39.98
Laser Vortex DIY Kit Time Tunnel for Halloween Haunted Houses Lighting Effects Creation -
Regular Price: $39.98
Special Price $34.98
HALLOWEEN RED LASER VORTEX TUNNEL EFFECT FOG MACHINE SPIRIT SPOOKY PORTAL PROP -
-
$18.00Embeded Laser Head Bar KTV Ball Stage Light Laser Module TTL 650nm 638nm -
$38.00Embeded Laser Head Bar KTV Ball Stage Light Laser Module TTL -
$15.52Bike Bicycle Intelligent Laser 5 LED Rear Light Cycling Tail Light -
$15.52Out of stock
Bike Bicycle Intelligent Laser 5 LED Rear Light Cycling Tail Light -
$11.95650nm 30mw Green Laser Welcome Stage Lighting -
$70.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting
3. the beam is not round, it is 1:3 rectangle
4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
$17.00532nm 50mW Green Fat Beam Laser Module KTV Party Club Stage Lighting -
$18.38Out of stock
532nm 10mw Green Laser Welcome Stage Lighting -
$17.36520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V -
$59.98Specification
1. stage lighting
2. building location
3. laser curtain
4. bird scaring5. beam diameter: 15mm
-
$39.00 As low as: $35.10Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
