26mm Water Resistant Green 35mW Line Generator laser module for Wood Metal Stone Cutting Locator

520nm Water Resistant Green Line Generator Laser Module for Stone Woodwork Sawmill Cutting Alignment 26mm
Specification:
Wavelength: 520nm±10nm
Output: 35mW
Dimension: Dia.26mm
Working Voltage: 12V/24V
Focal Length: 5-8m for stone cutting or wood cutting
Focusable: Yes
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade. 
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods. 
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply.

Comparing with 532nm laser modules, this one is better at those areas:
1. Wider working temperatuer from -25~45℃.
2. Working in more seriously conditions.

The best working method is 8-12hrs conntinuously working and 5 minutes resting. the mount will help the laser be fixed on the wall and prolong the duty cycle to 16-18hrs. Otherwise the laser may be burnt. Please read the using tips on the back of the warranty card. We will not take any responsibility for the incorrect use.

Note:    
The modules are tested and the output power are measured by laser power meter before sending out.    
Please don't compare the power of this one with a none-measured laser.    
If you doubt the output, please have the laser you recieved checked by laser power meter.    
If there is any problem, please feel free to contact us. We will solve the problem asap. 
Accessories:
We have EU and US standard plug for your option.