Search results for 'blue laser'
-
$20.00450nm 520nm Blue Green Laser Diode Constant Current Driver Circuit Board 12V 17-160mA
-
$20.00
450nm Laser Tube 100mW Laser Head Fat Beam Laser Head Fat Blue Laser Module
-
$187.506W 450nm Engraving Blue Laser Module can work on stainless steel
-
$6.25450nm 80mW Blue Dot Laser Module 12*15mm with no Driver
-
$115.004.75w white laser module for laser torch 4.3V 2.8A
-
$36.00445nm 450nm 520nm Blue Green Laser 24V-36V Boost Driver Board Power Supply
-
-
$68.963350 445nm3.5W Blue Dot/Line/Cross Focusable Laser Module
-
$24.98450nm 80mW Blue Dot Generator Module for Laser Swamp Haunted House Escape Room
-
$95.00
Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 5.3-5.5w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 4.5-4.75w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
$45.98 As low as: $43.50
Out of stock
9.0mm TO-5 Nichia NDB7775 1.6w-2w 445nm 450nm Blue Laser LD Diode -
$14.985.6mm TO18 Sharp 445nm 450nm Blue Laser Diode LD 85mw-100mw-110mw
-
-
$9.50
Out of stock
OSRAM 450nm 80mw Blue Laser Diode LD Single Mode PL450B TO18 5.6mm -
$43.48445nm 450nm 3.5W 3500mW Blue Laser Diode LD TO-5 Φ9mm Nichia NDB7A75 cut-pin
-
Specification wavelength: 455nm +-5nm output: cw 4.75w working voltage and current please check the datasheet attached. Functions: Laser engraving modules normally. It can engrave wood, plastic and furs but not for metal. RGB lasers will cut/engrave/mark on materials not reflect light. High output laser stage lighting on DJ, KTV and other stage lightings. Considering the very high output, we strongly recommend buyers use it on fat beam lasers.