Search results for 'red laser'

3350 445nm3.5W Blue Dot/Line/Cross Focusable Laser Module

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.

more details pls check the datasheet in the tital

for Night vision
for LLLT therapy
for Laser surgery

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting

3. the beam is not round, it is 1:3 rectangle

4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 5.3-5.5w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 4.5-4.75w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

9.0mm TO-5 Nichia NDB7775 1.6w-2w 445nm 450nm Blue Laser LD Diode

9.0mm TO-5 Nichia NDB7675 462nm 1.4W Blue Laser LD Diode Brand New

Nichia NUMB08 38w 450-460nm Blue Laser Diode LD Bank

445nm 450nm 3.5W 3500mW Blue Laser Diode LD TO-5 Φ9mm Nichia NDB7A75 cut-pin

Specification wavelength: 455nm +-5nm output: cw 4.75w working voltage and current please check the datasheet attached. Functions: Laser engraving modules normally. It can engrave wood, plastic and furs but not for metal. RGB lasers will cut/engrave/mark on materials not reflect light. High output laser stage lighting on DJ, KTV and other stage lightings. Considering the very high output, we strongly recommend buyers use it on fat beam lasers.

This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun

Features

•Optical output power (continuous wave): 1.6 W (T case = 25 °C)
•Typical emission wavelength: 450 nm
•Efficient radiation source for cw and pulsed operation
•TO56 package
•ESD protection diode
•Laser diode isolated against package

Applications
•Laser projection
•Laser shows
•Illumination
•Metrology

•Mini Laser Engraving Machine

33*55mm 1.6W 2.5w 450nm Blue Dot Laser Module for CNC Engraving Cutting

1000mw 1w 450nm Blue Laser Diode Module analog TTL Lighting Show 12vdc