Search results for 'green laser'
-
$335.00
High-Power Laser Light Source Stage Module 5W Laser Tube Red Green and Blue 12V Driver Board
-
$121.991W Fat Beam Green Laser Diode Diode Laser Module Stage Lighting Effect with Fan
-
$540.00
Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$2,250.00532nm 2W DPSS Green Dot Laser Module Analog 90~260VAC Lab Use
-
$67.00
300mW Laser Module Fat Beam Color Light Laser
-
$200.00
5W Laser High-Power Laser Head Marking Laser Laser Cutting PWM Control
-
$217.00
5W Engraving Laser 5W Compressed Spot Laser Spot Shaping Laser Head Wide Voltage
-
$63.50
1000mW Laser Engraving Head 3D Printing Laser Head Laser Engraving Module 12V / 24V Voltage
-
-
$350.00
Mixed RGB White Laser
-
$475.00Laser Diode 450nm 4.75*8W 38W numb08 bank extracted from laser projector.
-
$187.506W 450nm Engraving Blue Laser Module can work on stainless steel
-
$115.004.75w white laser module for laser torch 4.3V 2.8A
-
$109.99
3W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$68.963350 445nm3.5W Blue Dot/Line/Cross Focusable Laser Module
-
$70.00
Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting
3. the beam is not round, it is 1:3 rectangle
4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.