Search results for 'red laser'
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$17.36520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V -
$36.48520nm 100mw Green Laser dot Module Diode Stage Lighting Long Duty 12VDC TTL -
$20.00 As low as: $15.00specifications:
escape room
haunted house
bird scare
laser harp
laser marking locating
laser pointing
laser indicating
-
$20.40Out of stock
Operating Voltage 3V~5V Size 22 x100mm Output Power 10mw Wavelength 515 nm Radian Length 1~3m at 1m; Width <2mm at 1m Working Temperature -15 ~+35 centigrade Duty cycle without heatsink: 4-5hr Specially works for wood cutting machines. -
$16.55 As low as: $15.30Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard -
$13.38Out of stock
Feature:
Unique Color of Laser Beam, Pure Green or Light Green
Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode
No IR included like 532nm laser
Output stable at a much broader temperature range
Suitable for wood cutting, construction site, alignment, locating
Can be used in escap room stage lighting
-
$39.00 As low as: $35.10Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$5.50515nm 35mW Green Dot Laser Module with no Driver 12*15mm -
$17.00532nm 50mW 520nm 35mw Green Fat Beam Laser Module KTV Party Club Stage Lighting -
$14.0014*50 520nm 5mW Green Cross Laser Diode Module for Alignment and Position -
$25.001. not for handheld 2. for movie green screen use 3. for stage lighting as pic shows with fog. 4. duty cycle for 5mw is 6-8hrs, duty cycle for 80mw is 3-5hrs. -
$14.00Function
1. Collimation
2. Alignment
3. Normally used for spinning machine
4. Haunted house use
5. Stage lighting use
6. KTV Lighting show
-
$38.00Embeded Laser Head Bar KTV Ball Stage Light Laser Module TTL 520nm 200mw -
$12.98Laser Curtain
Wine Base
Bar
KTV use
Stage Lighting
Escape Room
Haunted House
Halloween Holiday use
