Search results for 'red laser'

Feature:

Mini Compact Size: 8mm diameter and 13mm cylinder length. It is easy for volume application into a matrix of laser modules in a laser device.

Special for Medical Use: Low Level Laser Therapy LLLT or Cold Laser Therapy
Safety Class 3R safe for contacting practice with human skin

This module is stable and well made for large volume application for industries and manufacturer of laser related equipment and devices. Laserland Service of Laser Module Customization 650nm 660nm Red Laser Module Laserland provides dot spot point, line cross-hair laser generator, laser module power range from 1mw, 5mw , 10mw, 30mw, 50mw, 100mw, 300mw, 800mw, 1W. For Cylinder(Barrel) Shape Laser Module, Laserland provide various diameter from 4mm 6mm, 8mm, 10mm, 12mm, 14.5mm, 16mm, 18mm, 20mm, 22mm, 25mm etc. 650nm laser modules are economy choice for industrial use like laser bar code scanner, laser pointer, laser level. ect.

Specification:
1. +10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods. 
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Features

1. specially used for emboidery machine

2. 5 degree cross hair can also be used on sewing maching and marking machines

3. texitile Machine use

4. needle craft use

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.

specifications:

Cloth/leather cutting locating

Laser sew locating

specifications:

escape room

haunted house

bird scare

laser swamp

laser cutting machine locating

This is a newly designed laser module for skin cutting for shoes manufacturers.  here you can find the details when it  uses on shoes. it helps the glue on vamp, tongue, heelpiece,  and toecap.

1. night vision

2. night scanner

3. cold laser therapy

4. LLLT

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

11. Spinning machine location

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting

3. the beam is not round, it is 1:3 rectangle

4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 5.3-5.5w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 4.5-4.75w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

Specification:
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade.
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Comparing with 532nm laser modules, this one is better at those areas:
1. wider working temperatuer from -25~45 centigrade
2. stable wavelength, no red bomb.
3. working in more seriously conditions.