Features

• Optical output power (continuous wave): 80 mW (T_case = 25 °C)

• Typical emission wavelength: 520 nm
• Efficient radiation source for cw and pulsed operation
• Single transverse mode semiconductor laser
• High modulation bandwidth
• Miniaturized TO38 ICut package
• Laser diode isolated against package

 

Applications

• Laser projection
• Laser shows
• Biomedical Applications
• Metrology

 

Safety Advice

Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 “Safety of laser products”.

DIY/LAB 3.8mm Opnext 635nm-638nm CW 120mw Orange-Red Laser Diode /HL63603TG

ADL65052TL TO-18 5.6mm 650nm 5mw 5.6mm Red Laser/Lazer Diode LD N-pin

650nm 660nm 250mw/350mw Push CW Red Laser Diode LD Mitsubishi ML101U29-25

SONY SLD231VL 20mW 780nm 785nm 5.6mm TO18 Infrared IR Laser/Lazer Diode LD

SONY KSS-151A 3mw-5mW 780nm 5.6mm TO18 Infrared IR Laser/Lazer Diode LD

5.6mm SONY 80mW 780nm 785nm Infrared IR Laser Diode LD TO18 7140-211N

ROHM RLD78NZM5 5.6mm 10mW 780nm 785nm Infrared IR Laser Diode LD TO18 for Floor Mopping Robot

445nm 450nm 3.5W 3500mW Blue Laser Diode LD TO-5 Φ9mm Nichia NDB7A75 cut-pin

SONY SLD3232VF 405nm 50mw Violet Purple Blue Laser Diode 5.6mm TO-18

Sharp 515nm 35mW Green Laser Diode GH05130B2G

Specification wavelength: 455nm +-5nm output: cw 4.75w working voltage and current please check the datasheet attached. Functions: Laser engraving modules normally. It can engrave wood, plastic and furs but not for metal. RGB lasers will cut/engrave/mark on materials not reflect light. High output laser stage lighting on DJ, KTV and other stage lightings. Considering the very high output, we strongly recommend buyers use it on fat beam lasers.

Features

•Optical output power (continuous wave): 1.6 W (T case = 25 °C)
•Typical emission wavelength: 450 nm
•Efficient radiation source for cw and pulsed operation
•TO56 package
•ESD protection diode
•Laser diode isolated against package

Applications
•Laser projection
•Laser shows
•Illumination
•Metrology

•Mini Laser Engraving Machine

Specification：

 DPSS laser module

 Medical, laser printing

 Marking/welding machines

Note：

1、 Work under suitable current and voltage

2、 CW power supply recommend, avoid pulse wave when use

3、 Working temp.: 10℃～30℃

4、 Avoid pointing directly to eyes or skin

1. USHIO OPTO SEMICONDUCTORS,INC.(UOS) neither warrants nor grants licenses of any our lights or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document, UOS bears no responsibility for problems that may arise with third party’s right, including intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.
3. UOS makes every attempt to ensure that its products are of high quality and reliability. However, contact our sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic safety equipment or medical equipment for life support.
4. Design your application so that the products is used within the ranges guaranteed by UOS. particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. UOS. bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating UOS product does not cause bodily injury, fire or other consequential damage due to operation of the UOS product.
   1. This product is not designed to be radiation resistant.
5. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from UOS.
   1. Contact our sales office for any questions regarding this document or UOS products.

Important Notice

 

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by UOS before they become applicable to any particular order or contract. In accordance with the UOS policy of continuous improvement specifications may change without notice. Further details are available from any UOS sales representative.

  

Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous