Search results for 'blue laser'
-
$900.00Fiber-coupled green light flashlight for detectives -
$350.00 As low as: $300.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$110.00450nm 5.5w Engraving Marking Engraver/Marker for wood/plastic/stainless steel -
$2,250.00532nm 2W DPSS Green Dot Laser Module Analog 90~260VAC Lab Use -
-
$22.98LAB-use no pd 9.0mm 1W 808nm/810nm IR Infrared Laser Diode LD TO5
-
$50.00Focusable 850nm 1W Laser Module Night Vision Laser Light Source -
$8.26808nm +/-3nm 1w 3w 5w C-Mount Infrared IR Laser Diode with FAC -
Regular Price: $249.06
Special Price $244.00
10W 808nm Laser Diode F-mount with FAC lens -
$91.98Out of stock
TO3 Package 3000mW 3W 980nm Infrared IR Laser/Lazer Diode LD W/ FAC -
$25.40 As low as: $22.00Features
•Optical output power (continuous wave): 1.6 W (T case = 25 °C)
•Typical emission wavelength: 450 nm
•Efficient radiation source for cw and pulsed operation
•TO56 package
•ESD protection diode
•Laser diode isolated against packageApplications
•Laser projection
•Laser shows
•Illumination
•Metrology•Mini Laser Engraving Machine
-
$47.50This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun -
$70.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting
3. the beam is not round, it is 1:3 rectangle
4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
-
$57.98more details pls check the datasheet in the tital
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
