Search results for 'blue laser'

Fiber-coupled green light flashlight for detectives

520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V

Specification Output <5mW Safety Class: Class 3R Wavelength 510nm Working Voltage 3VDC (two AAA batteries, not included) Working Current 280mA Laser Shape dot Material and Color all metal Working Temp.: -10~+45 Centigrade Pen Body Dimensions Diameter14*Length16mm Package 510nm green laser pointer ( batteries are not included)

specifications:

escape room

haunted house

bird scare

laser harp

laser marking locating

laser pointing

laser indicating

Operating Voltage 3V~5V Size 22 x100mm Output Power 10mw Wavelength 515 nm Radian Length 1~3m at 1m; Width <2mm at 1m Working Temperature -15 ~+35 centigrade Duty cycle without heatsink: 4-5hr Specially works for wood cutting machines.

Waterproof, Working in wet , damp environment Easy to Operate, Focusable Lens Use one 14500 li-on battery as the power source K9 Glass Lens, High Transmittance, and Power Resistance

Feature:

Unique Color of Laser Beam, Pure Green or Light Green

Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode

No IR included like 532nm laser

Output stable at a much broader temperature range

Suitable for wood cutting, construction site, alignment, locating

Can be used in escap room stage lighting

Sharp 515nm 35mW Green Laser Diode GH05130B2G

Features

• Optical output power (continuous wave): 80 mW (T_case = 25 °C)

• Typical emission wavelength: 520 nm
• Efficient radiation source for cw and pulsed operation
• Single transverse mode semiconductor laser
• High modulation bandwidth
• Miniaturized TO38 ICut package
• Laser diode isolated against package

 

Applications

• Laser projection
• Laser shows
• Biomedical Applications
• Metrology

 

Safety Advice

Depending on the mode of operation, these devices emit highly concentrated visible light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 “Safety of laser products”.

datasheet download

no PD 

with PD

Specification:
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade.
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Comparing with 532nm laser modules, this one is better at those areas:
1. wider working temperatuer from -25~45 centigrade
2. stable wavelength, no red bomb.
3. working in more seriously conditions.

specifications:

escape room

haunted house

bird scare

laser swamp

laser cutting machine locating

specifications:

Cloth/leather cutting locating

Laser sew locating

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.

Specification:
1. +10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods. 
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply