Laser Module
-
$7.883VDC 3mW 780nm Infrared IR Laser DOT Module Mini size -
$7.98Out of stock
650nm 660nm 3VDC 3mW 5mW Red Laser Dot Diode Module with NO Driver -
$14.58Focusable 3VDC 635nm 3mW Red Laser Module 12 X 35mm -
$6.88mini 650nm 1mw Red Laser Module with Driver 10.5x25mm EU Standard -
$13.00Focusable 650nm 5mw Red Dot Laser Module -
$9.985mW 10mW 20mW 30mW 50mW 532nm Green Line Laser Module -
$21.98 As low as: $17.00532nm Green Laser Line Module Generator Laser Swamp Sawmill Alignment 1865 50mW -
$22.00532nm Focusable Green Generator Projector Laser Line Module Sawmill Woodworks Swamp Haunted House Lighting Effects 18mm -
$18.98532nm Focusable Green Dot Module Diode Locator for Halloween Haunted House Laser Vortex Tunnel 18mm -
$27.00Out of stock
Long Time Continuous Working Escape Room Fat Beam Green Laser Diode Module Stage Lighting Effects 3VDC + Fan + Mount
Feature:
Laserland-Branded, Well made, High Quality Special made for escape room or night club bar Long time working (4hous at 20-30 centigrade environment) with fan which turn off when temperature get high;
Fat Beam, visible beautiful green laser beam for dark environment like escape room;
Easy for installation, with 110-220v ac-dc adapter and all round adjustable mount stand Moderate power, strong enough for lighting effects, not too bright to harm customers' eyes.(still have to make sure people don't see the laser emitting hole directly)
-
$17.00532nm 50mW 520nm 35mw Green Fat Beam Laser Module KTV Party Club Stage Lighting -
Regular Price: $88.00
Special Price $55.00
532nm 30mw 360 degree Green Pipe laser Profiling module -
$2,250.00532nm 2W DPSS Green Dot Laser Module Analog 90~260VAC Lab Use -
$30.98520nm Water Resistant Green Line Generator Laser Module for Stone Woodwork Sawmill Cutting Alignment 26mm -
$10.00520nm 650nm Laser Fat Beam Laser Diode Module for KTV Bar DJ Stage Lighting 12V -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
