Laser Module
-
$8.80Thick Beam 520nm Green Laser Module for KTV Bar DJ Stage Lighting Effects 30mW
-
$1.50Red Green Laser Head Diode Module Dot Line Cross Generator for Marking Positioning
-
$16.55 As low as: $15.30Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard
-
$3.98Laserland 0611 Small Volume 515nm Green Dot Laser Generator Module 5mW 5V
-
$38.00Embeded Laser Head Bar KTV Ball Stage Light Laser Module TTL 520nm 200mw
-
$17.00532nm 50mW 520nm 35mw Green Fat Beam Laser Module KTV Party Club Stage Lighting
-
$540.00
Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$5.50515nm 35mW Green Dot Laser Module with no Driver 12*15mm
-
$14.00
Function
1. Collimation
2. Alignment
3. Normally used for spinning machine
4. Haunted house use
5. Stage lighting use
6. KTV Lighting show
-
$39.00 As low as: $35.10
Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$38.00
Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$17.36520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V
-
$19.98
Laser Curtain
Wine Base
Bar
KTV use
Stage Lighting
Escape Room
Haunted House
Halloween Holiday use
Fan Cooling can work for long duty cycle
It can also be used by USB and power bank.
Can work with motorbike electronic system.
Easily installed on wall.
-
$36.48520nm 100mw Green Laser dot Module Diode Stage Lighting Long Duty 12VDC TTL
-
$12.98
Laser Curtain
Wine Base
Bar
KTV use
Stage Lighting
Escape Room
Haunted House
Halloween Holiday use
-
$20.40
Out of stock
Operating Voltage 3V~5V Size 22 x100mm Output Power 10mw Wavelength 515 nm Radian Length 1~3m at 1m; Width <2mm at 1m Working Temperature -15 ~+35 centigrade Duty cycle without heatsink: 4-5hr Specially works for wood cutting machines.