Laser Module
-
$47.50This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun
-
$590.00 As low as: $390.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$109.99
3W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$55.00
Industrial Focusable 300mw 400mw 980nm IR Infrared Laser Diode Module w/TTL
-
$50.00Focusable 850nm 1W Laser Module Night Vision Laser Light Source
-
$70.00
Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting
3. the beam is not round, it is 1:3 rectangle
4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
$13.99
635nm10mW Red Laser Module Line Laser Marking Cutting Button Cutting Machine Punching Machine Drilling Machine
-
$350.00
Mixed RGB White Laser
-
$27.00
Out of stock
Long Time Continuous Working Escape Room Fat Beam Green Laser Diode Module Stage Lighting Effects 3VDC + Fan + Mount
Feature:
Laserland-Branded, Well made, High Quality Special made for escape room or night club bar Long time working (4hous at 20-30 centigrade environment) with fan which turn off when temperature get high;
Fat Beam, visible beautiful green laser beam for dark environment like escape room;
Easy for installation, with 110-220v ac-dc adapter and all round adjustable mount stand Moderate power, strong enough for lighting effects, not too bright to harm customers' eyes.(still have to make sure people don't see the laser emitting hole directly)
-
$2,250.00532nm 2W DPSS Green Dot Laser Module Analog 90~260VAC Lab Use
-
$540.00
Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$366.00
Out of stock
473nm Blue DPSS Laser Module TTL/Analog Industrial Lab Stage Lighting Photographic developing -
$137.00
Out of stock
1000mw 1w 450nm Blue Laser Diode Module analog TTL Lighting Show 12vdc -
$39.00 As low as: $35.10
Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$38.00
Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$105.78
3380 980nm 0.8W IR Infrared Dot Laser Module with TTL