Laser Module
Wavelength Range: 405nm, 450nm, 520nm, 532nm, 650nm, 780nm, 808nm, 850nm, 980nm
Laser Pattern: Dot/Point Line Cross for line generator, cross-hair generator
Applications: 3D laser, laser engraving, wood saw mill, stone cutting, indicating, locator locating, range finder, military, gun sight
Indus Series Module: optimization of thermal stabilization, protection from shock or vibration, generating stable laser light source emitting.
-
$15.00Wine Holder Laser Slim Beam Green Laser Head 40mW Green Laser with Cap Laser Head 3.7V/5V Power Supply
-
$25.98Water Resistant Red Green Line Generator Laser Module for Wood Metal Stone Cutting Locator -
$40.00 -
$30.0011 parallel lines
-
$74.98SKY BLUE LASER VORTEX HALLOWEEN SPIRIT SPOOKY PORTAL PROP TUNNEL EFFECT -
$47.50This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun -
$590.00 As low as: $390.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$14.98Red Line Laser Throw Toe Marker DIY Kit Playing Dart Battery Operated with Magnetic Base -
$2.98Red Laser Positioning Light Line Scribing Meter 650nm Red Ground Laser Module 5V -
$1.50Red Green Laser Head Diode Module Dot Line Cross Generator for Marking Positioning -
$13.78Portable Focusable 10mw 50mw 100mw 150mw 200mw 648nm Red Line Laser Module -
$9.58New Portable Red Green Line Cross Laser Module for Alignment Woodworks Sawmill Tiles
-
$109.993W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$16.55 As low as: $15.30Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard -
$38.00Out of stock
Laserland 10*30mm 850nm 20mW Infrared Dot Laser Module Diode DC 3V~5V -
$3.98Laserland 0611 Small Volume 515nm Green Dot Laser Generator Module 5mW 5V
