Laser Module
-
-
$735.98Industrial Focusable 12VDC 3.2W 980nm IR Infrared Laser Dot Diode Module w/TTL -
$105.783380 980nm 0.8W IR Infrared Dot Laser Module with TTL
-
$137.00Out of stock
1000mw 1w 450nm Blue Laser Diode Module analog TTL Lighting Show 12vdc -
$366.00Out of stock
473nm Blue DPSS Laser Module TTL/Analog Industrial Lab Stage Lighting Photographic developing -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$2,250.00532nm 2W DPSS Green Dot Laser Module Analog 90~260VAC Lab Use -
$350.00Mixed RGB White Laser
-
$109.993W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$350.00 As low as: $300.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$6,500.00RGB40W Laser with Color Light High-Power Laser Module
