Laser Module
-
$217.005W Engraving Laser 5W Compressed Spot Laser Spot Shaping Laser Head Wide Voltage
-
$200.005W Laser High-Power Laser Head Marking Laser Laser Cutting PWM Control
-
$350.00Mixed RGB White Laser
-
$70.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting
3. the beam is not round, it is 1:3 rectangle
4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
$187.506W 450nm Engraving Blue Laser Module can work on stainless steel -
$50.00Focusable 850nm 1W Laser Module Night Vision Laser Light Source -
$95.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 5.3-5.5w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 4.5-4.75w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
-
$335.00High-Power Laser Light Source Stage Module 5W Laser Tube Red Green and Blue 12V Driver Board
-
$475.00Laser Diode 450nm 4.75*8W 38W numb08 bank extracted from laser projector. -
$109.993W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$350.00 As low as: $300.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$300.00RGB5W Laser White Light Laser 5W Laser Module TTL Control
-
$47.50This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun -
$935.00RGB10W Laser Color Light Laser Stage Laser Module with Small Size
-
$4,335.00RGB30W Laser Color Light Laser Stage Laser Module High-Power Laser Module
-
$6,500.00RGB40W Laser with Color Light High-Power Laser Module
