510nm-530nm Grass Green Laser Module

Feature:

Unique Color of Laser Beam, Pure Green or Light Green

Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode

No IR included like 532nm laser

Output stable at a much broader temperature range

Suitable for wood cutting, construction site, alignment, locating

Can be used in escap room stage lighting

16mm 510nm 515nm 520nm 30mW Dot Green Laser Diode Module 

Laser Curtain

Wine Base

Bar

KTV use

Stage Lighting

Escape Room

Haunted House

Halloween Holiday use

Fan Cooling can work for long duty cycle

It can also be used by USB and power bank.  

Can work with motorbike electronic system. 

Easily installed on wall. 

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 1-1.05w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

6. it is very bright so that when we use it on stage lighting, it get very good effect

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

11. Spinning machine location

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.