Stage Lighting

1. not for handheld 2. for movie green screen use 3. for stage lighting as pic shows with fog. 4. duty cycle for 5mw is 6-8hrs, duty cycle for 80mw is 3-5hrs.

Function:

1. laser curtain

2. escape room

3. stage lighting

4. ktv

5. wine base

6. laser harp

7. laser landmark

8. high-way warning light

Fat Beam 532nm Green 50mW Laser Diode Module f KTV Bar DJ Stage Lighting

25mm 445nm 450nm 80mW Blue Dot Fat Beam Laser Module KTV Bar DJ Stage Lighting

25mm 650nm 100mW Red Dot Fat Beam Laser Module KTV Bar DJ Stage Lighting

26mm Water Resistant Green 35mW Line Generator laser module for Wood Metal Stone Cutting Locator

Laser Curtain

Wine Base

Bar

KTV use

Stage Lighting

Escape Room

Haunted House

Halloween Holiday use

Fan Cooling can work for long duty cycle

It can also be used by USB and power bank.  

Can work with motorbike electronic system. 

Easily installed on wall. 

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting.

3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.

4. when you use it as cw output, it is 1-1.05w output.

5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

6. it is very bright so that when we use it on stage lighting, it get very good effect

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

11. Spinning machine location

Specification
1. stage lighting
2. building location
3. laser curtain
4. bird scaring

5. beam diameter: 15mm

520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V

532nm 10mw Green Laser Welcome Stage Lighting

532nm 50mW Green Fat Beam Laser Module KTV Party Club Stage Lighting

Can engrave:

Wood, plastic, paper, leather

Can cut:

Paper, thin leather, thin wood plate

Cannot engrave:

Metal, glass, stone, etc

Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.

 

Specification

1. when you adjust the beam diameter at 20-200mm, the beam is 0.5-0.8mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.

2. when you adjust the laser beam for fatter, it can be used as stage lighting. because of the fat beam, we normally recommend it as stage lighting

3. the beam is not round, it is 1:3 rectangle

4. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.

650nm 30mw Green Laser Welcome Stage Lighting